2 - Way Horizontal Splitters

A frequency bandwidth of 5 Hz to 100Hz with a housing made of ZAMAC5 zinc and is chromated and then plated with a bright nickel finish.

The dimensions are L 2.36" x W 2.01" x H .072". It conforms to the SCTE requirements of 1" spacing between the F ports. The F ports meet all requirements as spelled out in the SCTE's IPS-SP-406 document
Frequency in MHz 5-10 MHz 11-15 MHz 16-70 MHz 71-300 MHz 301-400 MHz 401-600 MHz 601-800 MHz 801-1000 MHz
Insertion Loss
(L) (Max)		 3.6dB 3.7dB 3.7dB 3.8dB 3.9dB 3.9dB 4.1dB 4.4dB
Return Loss
(RL) (Min)		 18dB 20dB 20dB 20dB 20dB 20dB 18dB 18dB
Port/Port
Isolation (Min)		 18dB 25dB 35dB 22dB 22dB 22dB 20dB 20dB

Electrical Performance:

Bandwidth: - Stated as 5MHz to 1GHz.

RFI: - Worst case measured as better than -120dB. The device was tested in a shielded chamber with typical or average measured performance of - 124dB.

Surge Withstand Capacity: - Will pass the IEEE 587 (C62,41-1991) 6KV 100KHz-ring wave test.

Operating Temperature Range:- From -40F to 140F

Price
 Each

Check Basket

Send Quote Request

 

Tyrone Fabrication Ltd Goland Road, Ballygawley, Co. Tyrone, Northern Ireland, BT70 2LA Tel:- + 44 (0) 28 8556 7200 Fax:- + 44 (0) 28 8556 7089